手電筒用英語怎麼說嗎

雖然現在手電筒的使用已經沒那麼廣泛了，但是作為以前它可是大大方便了我們的生活呢，今天本站小編在這裡為大家介紹手電筒用英語怎麼說，歡迎大家閱讀！

ing-bottom: 56.25%;">

flashlight

electric torch

手電筒電池 flashlight battery

微型手電筒 mini flashlight

強光手電筒 Glare flashlight

1. She froze when the beam of the flashlight struck her.

當手電筒的光照到她身上時她僵住了。

2. Stopping to rest, Pete shut off the flash.

皮特關掉手電筒，停下來休息。

3. Shine the torch on the lock while I try to get the key in.

我插鑰匙時，請用手電筒照著鎖頭。

4. The burglar shone his torch into the dark room.

盜賊將手電筒照進黑暗的房間.

5. Shine the torch on so that we can read the labels.

用手電筒照這個標籤,我們好看得見.

6. I saw the sudden flare of a flashlight in the darkness.

我看到手電筒在黑暗中突然閃出的亮光.

7. Flash your light about and see if anyone is hiding here.

用手電筒四周照照,看看是否有人藏在這裡.

8. He flashed a torch to guide me.

他用手電筒為我引路.

9. Shine the torch up into the rafters, please.

請用手電筒照房椽.

10. Most flashlights work on two batteries.

大多數的手電筒用兩節電池.

11. Suddenly somebody flashed an electric torch.

手電筒霍然一亮.

12. A flashlight beam probed the underbrush only yards away from their hiding place.

一束手電筒的光束在離他們的藏身之地只有幾碼遠的灌木叢裡搜尋著。

13. The torchlight swung across the little beach and out over the water, searching.

手電筒的光在小海灘上掃過，而後照向水面搜尋著。

14. I could see the beam of his flashlight waving around in the dark.

我可以看到他的手電筒光在黑暗中上下舞動.

15. His flashlight was still clipped to his belt.

他的手電筒還別在皮帶上。

How to turn a Minimag flashlight into a burning laser! CAUTION! As you know lasers can be dangerous. Never point them at any living object!

注意了，如何使一個小小的手電筒變成一個鐳射燈?你知道鐳射燈是一個危險的道具，千萬不要用它指著任何活物。

Step 1: Take Apart Your DVD Burner

第一步，拆開DVD燒錄機

First you'll need a 16X DVD burner.I'm using a LG that I had as a spare. Remove all the screws and take apart the case.

首先需要一個16X的燒錄機。我自己使用的是一個LG牌子的燒錄機，還有一個備用的。去掉所有的東西，只要這個小盒子。

Remove the drawer to expose the carriage assembly. That's where you will find the powerfull laser diod.

去掉外殼之後你會發現鐳射直撥外線。

Step 2: Remove The Laser Diod

第二步，取下鐳射外線

All DVD burners will have a set of rails that the laser assembly rides on.

所有的燒錄機都有一組插孔，鐳射裝置就插在上面。

After pulling out the assembly, start removing all the little screws to get to the laser diod. Be careful because the diod is a fragile electronic component.

拔出這個裝置，取下所有的零部件以找到鐳射外線。要小心，因為這個外線是易碎的電子元件。

Step 3: Disassemble An AixiZ Laser Housing

第三步，拆開鐳射裝置

Then you'll need to pick up an AixiZ laser will have to disassemble it and also remove the laser that comes in the housing.

拿起鐳射裝置在的部件，拆分，並使鐳射發光部件分離。

I used the back end of an exacto knife handle and gently tapped out the existing laser diod.

我用刀子的刀背挑出DVD中的鐳射外線。

Step 4: Install The Laser Into The New Housing

第四，將取出的外線裝置移植到新地方

Then you're going to carefully install the DVD laser into the new laser housing. You're almost done.

小心將DVD鐳射放置到新的基架上，就基本完成了。

Step 5: Connect Up Your Laser Diod

第五步，連線鐳射外線

All DVD laser diods use a similar configuration. Be sure to test your polarity using two AA batteries.

所有的DVD鐳射外線都有類似的配置，用兩節AA電池測試輸出電壓。

Then you're going to solder two longer pins onto the positive and negative terminals onto laser diod.

然後將長插腳兩端焊接在外線的兩極上。

Step 6: Add The Laser To The Mag Lite

把鐳射與手電筒相連。

Disassemble your Mag Lite, removing the ring, the inside reflector and of course, the bulb.

拆開手電筒，移除彈簧、內建鏡和燈泡。

We'll need to drill out the existing reflector so it sits around the laser housing.

需要穿過反射器，這樣鐳射能處在反射器中間。

Step 7: Test It For Yourself

第七，親自試驗一番

Now put everything back your two AA batteries,And here are the test results.

現在將所有的東西組組裝起來，裝上兩節AA電池，然後你就能看到結果了。

Your new burning laser pointer easily lights a match and pops a balloon in an instant. That's how you turn a mini-mag flashlight to a powerful burning laser pointer.

這個鐳射束輕易就點燃了火柴，燒投了氣球。這就是改造手電筒成鐳射的神奇過程。

猜你喜歡：

1.3篇英語短文帶翻譯閱讀

2.英語哲理故事帶翻譯閱讀

3.英語短文帶翻譯150字

4.有關英語短文帶翻譯閱讀

5.英語短文帶翻譯