載入用英語怎麼說
載入字面意思是增加裝載量。現多用於計算機相關領域，表示啟動程式時檔案或資訊的載入。那麼你知道載入用英語怎麼說嗎?下面來學習一下吧。
載入英語說法1：
load
載入英語說法2：
load-on
載入的相關短語：
斜坡載入 Ramp Load ; Ramped Loading
正在載入 loading
載入函式 Loading function ; load function
塑性載入 Plastic loading
載入選項 Load Options
載入電纜 Loading Cable
預先載入 preload ; pre-loaded ; eager loading
均勻載入 uniform loading ; continuous load ; load continuously
載入平衡 load balance
載入的英語例句：
1. Sometimes charged cursor programs forget to change the appearance of the cursor.
有時使用載入游標的程式忘記改變游標的外觀.
2. The middle core was loaded.
中間那塊巖芯曾載入.
3. The head load time is: 35 ms.
磁頭載入時間: 35毫秒.
4. A charged cursor also demands good cancel idioms. Otherwise, how do you harmlessly discharge the cursor?
載入的游標也要有合適的取消操作習慣用法, 否則你如何安全地取消游標的載入狀態 呢 ?
5. There are two basic variants of palette tool behavior: modal tools and charged cursor tools.
它們的行為有兩種基本型別,即模態工具和載入的游標工具.
6. A replica technique is used to record the scratch patterns before and after loading.
可採用一種複製技術把在載入前後的劃痕圖案記錄下來.
7. The simplest imposed conditions are those in which the loading is periodically and uniformly repeated.
最簡單的載入情況是週期地、均勻而重複地施加的載荷.
8. The unloading curve normally falls below the loading curve to form a hysteresis loop.
解除安裝曲線通常都落在載入曲線之下,形成一個滯後回線.
9. In many open - loop machines, there is single - valued relationship between loading rate and stiffness during dynamic testing.
許多開路機器在動態試驗時,載入速度和剛度之間只有單值關係.
10. Loading was achieved through a battery of hydraulic jacks acting on a rigid metallic distribution plate.
通過作用於剛性金屬墊板上的一組液壓千斤頂載入.
11. The elements of the load vector, { P } , are the load components tabulated in numerical sequence.
載入向量P的元素是按編號順序列表的載入分量.
12. Appreciable differences may occur, however, when small deformations considerably alter the loading conditions.
當微量變形能使載入條件發生頗大改變時,就會產生頗大的差異.
13. If the structure is elastic the force - displacement curve follows the same path on loading and unloading.
如果該結構為彈性者,那麼在載入和解除安裝時力位移曲線遵循相同的跡線.
14. High - strength bolts were inserted into the holes and tightened to a high preload level.
把高強度螺栓插入孔洞,同時擰緊螺栓達到高的預載入水平.
15. Key removable in locked position only. Spring loaded clip - in pawl.
只能在鎖住位置時取出鑰匙, 彈簧載入的嵌入式掣子.
